|
DynaFlo 8000 Mattress Replacement System
Low Air Loss, Low Pressure & Fuzzy Logic Control
Dynamic Low Pressure Pump and Replacement Mattress System
Fast Installations:
At start up, the microchip processor commands the internal synchronous motor to regulate proper air volume output to fast inflate all tubes. Once the proper inner pressure is reached, the microchip processor then switches output to the alternating mode.
Fuzzy-Logic Alternating:
The fuzzy-logic microchip adjusts pressure to user-selected pressure level according to user-selected pressure setting automatically after initial fast inflation. The processor begins alternating mode and suspends internal compressor pump operation. This lengthens compressor's life expectancy and is energy efficient. The pump comes back on when the pressure level drops below the desired setting.
Static Mode:
DynaFlo 8000 offers a manual-select static mode. The factory preset static mode suspends the alternating function when the blue button is activated. The compressor continues to supply the selected pressure setting. This static mode allows caretakers to perform transfers and therapy for patients in different stages of bed sore treatment. Then the static button is pressed again, the microchip processor restarts alternating mode.
Visual Indicators and Sonic Alarm:
The green LED indicates normal operating pressure. An amber LED indicates that pressure has dropped to unsafe levels (5 mmHg or less). Additionally, an alarm buzzer warns the caretaker if the pressure drops below 5 mmHg, should there be any leakage or puncture in the tubes.
High Volume Output:
The DynaFlo 8000 pump is a high capacity pump. It offers an 8 liters per minute output to the mattress. This allows fast inflation and full support of the mattress.
Cell-In-Cell Design:
The DynaFlo 8000 mattress comes with our patented "Cell-in-Cell" air tubes. This design provides additional protection for the patient in case of power failure. Caretakers can have the peace of mind that the patient will be supported for several hours even after the power failure. (U.S. Patent No. 2971248.5 Germany, 3046190)
|
